QTS F300 3D PRINTER ALL MADE IN TAIWAN
Graphical touch user interface
F300 with Graphical touch user interface, make user more easy to read, use more friendly.
Time pause and continue
When press the pause bottom, you can handle the fault or change the material.
Shutdown and save
When you turn off the machine, you can save the printing position.And next time you can keep going to print that you saved.
Heating Platform
The heating platform will reduce the impact of ambient temperature on the print.The heating platform increases the success rate of printing and reduces the cost of time consuming.
Steady DELTA architecture
In order to provide customer with the most accurate, strong and durable DELTA 3D printing equipment。QTS F300 is a DELTA structure of the linear motion agencies, and F300 is the simplest way to connect to create the most solid architecture of machine on the market.Reduce the difficulty of assembly and time, and increased the stability of the machine, under long-term operation is also able to print to meet expectations.
9mm Taiwan timing belt
F300 using KVELAR fiber material 9mm Taiwan made PU belt, compared to the 6mm belt that commonly used, more able to maintain a long tension,to reduce the problem of the belt tension that without the problem of printing accuracy recession.
Precision silence slide - Made in Japan
Japan's THK linear slide series, with low load, high response characteristics, and excellent quality without maintain.
Easy maintain-feed nozzle
Exclusive design, precision machining of toothless design, greatly optimized the maintenance of the nozzle for the convenience, so that the replacement nozzle become an easy thing.
Filament stopper
Wire holder exclusive design, easy to fix.
with this exclusive design, you can very easy to change the filament.It is not like old design that make you very inconvenient that one hand feed filament, another hand push the extruder holder.
with this exclusive design, you can very easy to change the filament.It is not like old design that make you very inconvenient that one hand feed filament, another hand push the extruder holder.
stopper open
stopper close
TECHNICAL SPECS
Printing Technology:
Fused Deposition Modeling
(FDM)
Machine Size:
W53cm*L53cm*H80cm
Maximum printing volume:
Ø300mm x H250mm
Filament:
PLA/PETG/ABS
Filament diameter:
1.75mm
Layer height:
50microns
Printing temperature:
170~250˚C
Hod bed:
24V/150W/110˚C
Feeding method:
Distant
Correction technology:
Auto level / Height setting by manual
Core cpu:
32 – bit multi-processor
User interface:
Full color touch panel Chinese/English
Electric supply & Power:
Full load :250W/Average:100W
Fused Deposition Modeling
(FDM)
Machine Size:
W53cm*L53cm*H80cm
Maximum printing volume:
Ø300mm x H250mm
Filament:
PLA/PETG/ABS
Filament diameter:
1.75mm
Layer height:
50microns
Printing temperature:
170~250˚C
Hod bed:
24V/150W/110˚C
Feeding method:
Distant
Correction technology:
Auto level / Height setting by manual
Core cpu:
32 – bit multi-processor
User interface:
Full color touch panel Chinese/English
Electric supply & Power:
Full load :250W/Average:100W
Downloads
user_manual-qts_f300.pdf | |
File Size: | 6301 kb |
File Type: |