◼ Product Introduction
QTS Basic Clear Resins produce highly transparent 3D printed models with ease, allowing you to print optical and other see-through models or prototypes that do not turn yellowish during the post-curing process.With easy printing and low shrinkage characteristics, it maintains high precision and is not prone to brittleness.
QTS Basic Clear Resins produce highly transparent 3D printed models with ease, allowing you to print optical and other see-through models or prototypes that do not turn yellowish during the post-curing process.With easy printing and low shrinkage characteristics, it maintains high precision and is not prone to brittleness.
◼ Instructions for use
- Be sure to shake and mix well before use to avoid long-term precipitation.
- This material is a light-curing chemical. Rubber gloves must be worn during operation to avoid long-term contact with the skin to avoid allergies and itching.
- Or using special cleaning agent for cleaning.
- The exposure parameters of different brands of models will be different. It is recommended to print a calibration film to confirm whether the exposure parameters are appropriate for the first use.
◼ Post-curing treatment
This material must undergo sufficient post-curing treatment after molding to achieve the best mechanical properties and surface dry and wear-resistant properties.
- UV post-curing in the 365~405nm light box for 10~60 minutes (depending on the color and thickness of the material, the thicker the thickness, the longer the post-curing time is required).It is not enough to use sunlight as the post-curing.
- It is recommended to use a special UV post-curing lamp for 3D printing in order to achieve the best results.
- If it can be combined with heat curing at 60℃ * 60 minutes, the toughness will be better.
◼ Product packaging specifications
1Kg black opaque plastic can.
◼ Storage and transportation
- Product shelf life: 12 months
- This product is a light-sensitive material, avoid storing in direct sunlight, high temperature and humidity, etc.
- Be sure to shake and mix well before use to avoid long-term precipitation.
- This material is a light-curing chemical. Rubber gloves must be worn during operation to avoid long-term contact with the skin to avoid allergies and itching.
- Or using special cleaning agent for cleaning.
- The exposure parameters of different brands of models will be different. It is recommended to print a calibration film to confirm whether the exposure parameters are appropriate for the first use.
◼ Post-curing treatment
This material must undergo sufficient post-curing treatment after molding to achieve the best mechanical properties and surface dry and wear-resistant properties.
- UV post-curing in the 365~405nm light box for 10~60 minutes (depending on the color and thickness of the material, the thicker the thickness, the longer the post-curing time is required).It is not enough to use sunlight as the post-curing.
- It is recommended to use a special UV post-curing lamp for 3D printing in order to achieve the best results.
- If it can be combined with heat curing at 60℃ * 60 minutes, the toughness will be better.
◼ Product packaging specifications
1Kg black opaque plastic can.
◼ Storage and transportation
- Product shelf life: 12 months
- This product is a light-sensitive material, avoid storing in direct sunlight, high temperature and humidity, etc.
